沈陽瑞得塑膠制造有限公司
地址 :沈陽市道義開發區正良五路8號
電話 :024-89737778
024-89737878
傳真 :024-89737879
網址 :http://www.rak-mor-or.com/
Email : OFC@syruide.net
微信平臺號:syruide
Automotive sealing strip seal can improve the tightness, prevent the rain into the car. Once the sealing strip aging damage, will cause the rain leakage, increase the car driving wind noise, leak and it is easy to make the body corrosion. Thus it is not hard to see, for cars, sealing strip is one of the important parts, must be inspected on a regular basis to maintain at ordinary times. Now there are many professional vehicle sealing shop, tailored for different models, exactly match the original curve slope and curve curvature, ensure continuity between body parts, avoid combining site to produce air separation, dissolve the periodic wake easily, can reduce the high speed wind noise, at the same time enhance the capacity of the original car air tightness and dustproof. Vehicle front seal, back tallied, side edge seal: set up the hood, the hood front, back tallied, side edge paste with identical parts of the body, can effectively seal the gap between the hood and body, vehicle traffic on the way, can accelerate the air from the inlet gate pass, increase the cooling performance.
Gap between interior trim panels and doors, instrument panel, store content box, and other car interior parts, due to reasons such as assembly and machining accuracy, often there is friction, in the process of the vehicle will cause resonance under different speed, disturbing noise, the noise in general it is hard to find. Sealing flange in repair the door, we should pay attention to repair the damaged sealing flange, accurately recover the original of the shape of the flange. After repair the door for sealing the inspections and inspection method is: put a piece of cardboard on the sealing position, closed the door, then pull the paper, according to the size of the tension to determine seal are in good condition. If the pulling force is too large instructions for scraps of paper sealed tight, this will affect the door closed, and still can make a seal for deformation bedding face quickly lose sealing performance; If pull the paper is too small, the force required for sealing.